July 16, 2010 - I've been working on other cars, and the Targa Miata has been sitting.
"Sure boss, I guess I'll drive the supercharged 2006 at the track day to see how it does" - that was actually a really good track day, as it poured rain. The combination of a powerful car on wide street tires and heavy rain made me work on some skills that could prove very useful at Targa.
But the car hasn't been forgotten. I've removed the 300 lb secondary springs to cut down on that initial body roll and sharpen up the car's reflexes. The radiator was removed as part of some cooling system testing and has ended up in Janel's street Miata. The differential is coming out so we can test a different unit. All of this should be on the track in a bit over a week.
But when I was working on the car, I discovered a problem. I know the Performance Friction PFC97 pads are hard on rotors, and I've been watching the slots on the rotor as a guide of wear. But when the wheels were off for something else, I took a closer look and was shocked. The rotor in the picture used to have slots! The outer face still has lots of meat and isn't showing dramatic wear, but the inner face is completely worn away. Both front wheels were like this. Yikes. I also discovered a cracked rear rotor.
So, what happened? Good question. The brackets on my brakes are from a source that often needs a bit of shimming to get them aligned well enough to clear the rotors, and even then my calipers are off-center on the rotor. I wouldn't think a 4-piston caliper would matter, but the brackets are being replaced with new ones that are perfectly designed and machined to keep the caliper centered. New rotor rings are on the way. Flyin' Miata is also testing a different brake kit that will be on the car for the next couple of track days, so there's no big hurry.
I have new rotor rings on the way to replace these.
tags: brakes, suspension, cooling |
THE DIARY