June 16, 2008 - I swapped out all the control arms for new ones this weekend, as planned.
I'll get it aligned on Wednesday, then we'll see what effect this has on the car. It does appear that I have more negative camber up front, which is good. Not very much of it, but more.
While I was under there, I welded this little ramp on the lower rear control arms. The adjuster for the shock protrudes through the arm just slightly. It's not something I'd be worried about in any other car, but just in case I drop a wheel off the edge of the road this should provide a bit of protection for the adjuster. It ended up being taller than it needed, but that's better than too short!
tags: suspension |
THE DIARY