Targa Miata
MIATA BUILD
Click to see the next entry
October 30, 2007 - Time to get ready for a big test.
There's a track day in Pueblo on Friday. This will be the first time I've taken the car on a "big" track, instead of the tight kart track I've been using. It's going to be interesting to see how it does.
One of the jobs to be done before heading to the track 200 miles away is to swap out of the differential. Howard Booster is building a Westfield, and graciously allowed me to borrow his differential for the weekend so I could test with a Torsen and not have to disassemble the Seven. Thanks Howard!
While pulling the diff, I discovered the source of a banging noise under hard cornering. I'd figured it was the exhaust hitting the differential. Close,but not quite. It was the exhaust hitting the flange on the two-piece halfshafts! You can see the evidence in the picture. The two piece halfshaft was never used from the factory with the 1999-05 exhaust system I'm running. I'd used two piece units because it makes it a bit easier to pull the differential, but after dropping the open diff out of the car today I've realized that it doesn't really make all that much difference! Substituting one-piece halfshafts gave me the clearance I need.
So, almost ready to go. I'm going to tow the car over so Janel can come with me. I'll pile a bunch of swaybars in the back of the tow vehicle so I can play with handling, and I'm going to try a couple of different alignment setups. Oh yes, and I have to receive and install the new suspension! Little stuff, you know.
tags: exhaust, drivetrain, interchange