June 17, 2008 - I had the car aligned today.
I had a 9 am appointment and the car went on to the (empty) rack at 10. Sigh. Still, by 11:30 it was all lined up and looks to be a decent job. The right front wheel wouldn't give any more than 1.4 degrees of negative camber, which is a bit of a shame. I was hoping for about 0.5 degrees more. It could very well be my ride height, of course. According to the Spec Miata Constructor's Manual, I should be able to do a bit better. But I know from hanging out with certain Spec racers that it's not unusual for the upper control arm to be accidentally and carefully bent a bit, giving more camber. Good book, by the way.
So, how does it work? I took the car out for a run on my local Targa Simulation Road (assuming the Targa has pinon tree, red rocks and 95F temperatures) and it feels pretty good. The front end sticks beautifully and it puts power down well. Of course, I'll have to take it to the track to see if the low speed, tight radius wheelspin is gone but fast road work is not a concern. I still want to spend a little more time fine-tuning the shocks but I feel the car would be quite competitive at the Targa as it sits.
The new padding for the seats seems to work quite nicely. It wasn't a 2+ hour test, but so far it's an improvement.
I also spent a bit of time tuning the engine with the new cams. They don't like to idle much, but I'm starting to get that under control. The car feels pretty strong and it's adding a whole pile of fuel at 4500 rpm or so - right where the previous cams had a big dip in power, and right where I need a big slug of torque. So far they're promising.
tags: weight loss, ergonomics |
THE DIARY