May 12, 2011 - With the transmission in place, I was able to locate the frame rails and bolt them in to place.
The mount for the T5 transmission has no adjustability built in, so I wasn't able to do this earlier as can be done with the T56 transmissions.
I did run into a small problem with the transmission crossmember - the bushings on the crossmember were too wide for the brackets. Some grinding ensued, resulting in hot pink urethane dust. Very entertaining.
As per Bill's suggestion, I tack-welded the bolts for the subframe to the floor. This means the rails can be easily removed without the need to pull the seats or to have someone hold the top of the bolts. That's a good thing, as one of the rails needs to be removed in order to pull the transmission.
tags: transmission, V8 |
THE DIARY