| MIATA BUILD |
|
|
 | |  | March 10, 2008 - What about in the car?
Once I'd roused Janel from the comfort of a warm tow vehicle, we discovered that our concerns about nausea were unfounded. With the rally computer to play with, she was distracted and forgot to get sick. Excellent!
The intercom worked well, allowing me to hear her clearly. She couldn't hear me quite as well - probably because the speakers were further from her ears - but that's a good setup. I did discover how hard it is to concentrate on driving quickly while also carrying on a conversation about how the trip computer works. Once the communication became more one-way, I was able to work better on dealing with the inputs.
For one session, she brought along a book and read it to me. Seems like an odd test, but we didn't have pace notes for the track, you see. Again, no problems with nausea as long as she kept her legs braced and didn't let them flop around. So the track day was a good test then. We learned a few things, that was the goal.
Eric asked for a picture of the whole interior in the mostly-final configuration. Here you go!
entry 432 - tags: testing, skills, computer, intercom | | |  | March 10, 2008 - A very serious sticker.
I saw some spy shots of the Porsche Panamerica taken in South Africa. They had this sticker. I had to have one, so a friend duplicated it for me.
The track day wasn't all work on the race car. I got to drive the FM Westfield, now with 100% more turbocharger. Holy cow, it was a great ride. The chassis of the Westfield was easily able to deal with the horsepower, and it became a massively fast machine. It had a better power/weight ratio than the Atom I drove almost a year ago, while also having a much better gearshift and more exploitable handling. It's a beast.
Another car that I got to drive was a V8 powered MGB GT. It made a wonderful noise. It wasn't fast - there's still a lot of work to do on the car - but the combination of the shape in BRG and the rumble was compelling. There's an advantage to hanging out in the pits wearing a driver's suit and playing with an obvious race car - people ask you to drive their cars and want to know what you think!
entry 433 - tags: other cars | | | March 12, 2008 - Back on the dyno.
I took the long (loooong) way in to work this morning to make sure the wideband was working well. Other than a really slow warm-up time, it seemed to be. But when we strapped the car to the dyno, it was misbehaving by the third run. This is really frustrating. Time to do some more diagnosis - the guys at Hydra want me to try a different ECU.
I didn't do any cam testing as I'd hoped, so instead we basically just repeated what we'd done before - but we pulled out a bit of the excess fuel and put in a degree of timing. Nothing to make any difference to the curves.
Instead, I'll probably end up swapping cams at home, then using the autotune feature of the ECU to see if it wants to add fuel. Crude, but it'll give me a rough idea of what's happening. Then it'll go back on the dyno in a few weeks.
entry 434 - tags: engine, dyno | | |  | March 13, 2008 - This is what coil bind looks like.
See the marks on the springs where the coils came together? Not good. What's interesting is that the right side is almost completely free of marks. The perch on that side was 8mm lower. That's the margin of error I was dealing with. Why did this happen? Because I put the wrong bumpstop for my ride height in the shocks. Whoops.
No worries, I have others. I also have those 10" springs coming. The big question is - do I try the 375/300 combination, or do I install the 300/250?
entry 435 - tags: suspension | | | March 13, 2008 - I've decided after the day at the track and some street driving that I really like having a Camelbak installed in the car with a handy drinking tube.
It's amazing how often I find myself taking a sip. On the front straight of the track, on the back roads, on the drive home from work. Highly recommended!
entry 436 - tags: ergonomics | | |  | March 16, 2008 - I was going to spend the weekend working on the car's suspension.
I have the new springs. However, AFCO wanted to take a look at the shocks so they're off getting checked out. This also prevents me from doing any more testing on the wideband.
Instead, I installed the first aid kit. This was provided to us by Susquehanna Motorsports, aka rallylights.com. It's mounted in the trunk, and I made this strap to hold it in place securely. There's also a piece of aluminum angle iron riveted in front to hold it in place. It's not going anywhere, but it's quick and easy to access. Perfect.
entry 437 - tags: safety, sponsors | | | March 21, 2008 - Big work on the car so far this week.
It's on jackstands, waiting for the shocks to come back after a final AFCO checkup. So I spent some time on it last night and wired up the horn. Big job! Actually, more complex than you might think because the steering wheel adapter I have on the car is from...well, I'm not sure what it's from. Definitely not a Miata. So the wiring doesn't fit. Thus I resorted to a coiled phone cord that can wind around the column as I twirl the wheel merrily. Hey, it needed to be done.
Beep!
entry 438 - tags: wiring | | |  | March 21, 2008 - The Targa Miata is featured in the premiere edition of Forever MX-5 magazine!
It's an honor to have the car chosen as their first feature car, and I'm really happy with how the article came out. Heck, I'm like a proud father.
If you'd like to read the article, you can download it here as a 3.2 MB PDF file.
The magazine isn't available on newsstands, but you can subscribe at ForeverMX5.com or a copy of the issue at Carzines.com. They've actually asked me to be a regular columnist for the magazine, either due to my writing abilities or out of sheer desperation. You decide.
Here's why they chose it:
We chose Keith Tanner’s Targa Miata as our feature car for the first issue of Forever MX-5 because it embodies the very best of the Miata world. It’s a top-notch sports car, built for speed, handling, and all-around performance. And it’s a beautiful work of art, painted and polished with care and attention to detail. Finally, it’s a car built for a lively purpose — running flat out on the open road, having the time of your sweet life with your best friend by your side.
entry 439 - tags: announcements | | | March 26, 2008 - The shocks are back in the car.
I installed the 375/300 springs. They'll get their first test on Sunday at another Corvette autocross. Hopefully I'll get a chance to throw the car into a few hard corners first so I don't discover lots of oversteer by accident. I'll have some tools with me!
entry 440 - tags: suspension | | |  | March 30, 2008 - I need new brake pads.
Something more suited to the sort of use this car will see. I'm going to run the Performance Friction PFC97 on the front and Carbotech XP8s on the rear. This is a combination that has worked really well on some Flyin' Miata cars, giving very good braking when cold and exceptional braking when hot. The downside is that PFC97 destroys rotors when cold. No worries, they're easy to change out.
The fronts are on order. But for the rear, I had a set of XP8s in the 2001-05 brake size. I also had a set of Porterfield R4S pads in the 1994-02 size, which conforms to the calipers I have in the car. Brandon needed a set of R4S pads and had 2001-05 brackets in the rear of his car. Since my rear brackets are from a Flyin' Miata big brake kit and use the same size rotor, we decided to swap. Parts went flying everywhere, and when we were done we each had new rear brake pads in the size we wanted. It seems very complex in retrospect, but really it makes sense.
entry 441 - tags: brakes | | |  | March 30, 2008 - The Carbotech XP8 pads appear to have copper in them them.
Either that or gold. There are big flakes in the pad compound.
entry 442 - tags: brakes | | |  | March 30, 2008 - I have a few road miles on the 375/300 spring combination, and I really like how it's working.
It's a good balance between supple and responsive on the road. Very nice, I think this will be the final spring setup for the race.
entry 443 - tags: suspension | | |  | March 30, 2008 - Autocross time!
The Corvette club was holding another autox, so I brought out the race car to see how the new suspension would sort out. Last time, I was hampered by the open differential but still posted a good time. Let's see how it works this time.
The lot was dusty and it was relatively cool, so it was a good test of the ability to put power down. Which turned out to be a challenge. Despite the Torsen diff, I was still getting wheelspin on the inside rear wheel exiting right turns. This is frustrating. It wasn't a problem on the track a few weeks back and it was only apparent on the tight confines of an autocross course, but still - I thought I had this licked. I'm going to do a little more poking around. Course workers confirm that the inside rear was simply unloaded and just spun up. A Torsen will go fully open when there's just no traction on one corner. I could throw in a preloaded Guru differential for the track day next weekend, or maybe I'll just let it stay as is so I can do a direct before/after comparison.
The first few runs showed that I had the ability to light up the rear tire(s) and slide the rear end around, but also that the car seemed to have some understeer in the few steady-state corners on the course. So I softened the front sway bar slightly to see if that sorted the problem. Yup, the car was much happier. It may be a little too biased towards oversteer now, but we'll find out next weekend on the kart track. Right now, it'll do exactly what I ask it to and can really be moved around on demand. Of course, that's with a maximum speed of 57 mph according to the rally computer. How will it do at 120?
I was also playing with the brake bias, thanks to the new pads. For a couple of runs, I had too much in the rear. The final braking zone took place in the middle of a big sweeper, so the car was unbalanced to begin with. On one run, I was countersteering fairly enthusiastically to keep the rear wheels behind me as the car wagged its tail into the corner. It worked, though, and a quick twist of the proportioning valve sorted that out. By the end of the day, I had the brakes dialed in pretty nicely and the car was mobile yet controllable under braking. Of course, I'll have to do it all over again once the new pads are installed.
So, how did it do? Well, there was an STi on sticky tires in attendance. Try as I might, I couldn't get within a half second of him. But Brandon and I were locked in a great battle. He has an extra 110 hp and Azenis tires, while I have the Toyo RA1s. It turned out to be an excellent match, going right down to the wire. The final margin was 0.079 seconds, with me being slightly faster. What a great race. I managed to come in second overall, which is not shabby at all. None of the Corvettes able to keep up with the three fiercely battling "metal cars". The fastest 'Vette was 1.8 seconds behind us.
Brandon, if you're going to strike a goofy pose for the picture, I'm going to take the picture!
entry 444 - tags: testing | | |  | April 5, 2008 - Another trackday test.
This was on our local kart track, the same track used for the car's first track day. I wanted to see how the suspension was doing, and see if the car could put power down.
Immediately it became apparent that the track was fast today. My existing lap record fell almost immediately to a turbo Westfield. That was set in the Seven, so I didn't have a chance to fight to get it back. My own times were quick as well though, as I ran times that were quicker than we've seen from Miatas here before. Recent rain has left the track much cleaner than usual, I suspect.
On track, the car felt great. The suspension is almost perfect, allowing me to take completely ridiculous lines through the chicane. I wasn't just putting the wheels on the berms, I was dropping off the other side and essentially straight-lining the course. I never bottomed out and the car wasn't upset at all. Only once did I scuff the bottom of the car, and to do that I had to put my outside wheels where most people ran their inside ones! We shot some video of the car from behind that shows my fairly ludicrous lines, I'll have that posted before too long. When I took my friend Mark (last seen welding the roll cage into the car a year ago) out for a ride, he was amazed. "It doesn't feel like a Miata, it feels like a rally car!". He was also impressed with the feeling of stability and adjustability in the car, as it just gripped and gripped and never seemed to get upset. The car and I are bonding, and it's become a very useful tool. Bill Cardell took a break from hammering on my lap record to take the car out for a run, and he was quite impressed with the setup as well. The new brakes with the Performance Friction front pads really worked nicely, hauling the car down remarkably fast with lots of stability. There are a couple of corners on this track that really test both braking and stability so it was a good venue.
Unfortunately, the car again showed an inability to lay down any power in a right turn. I started running with ballast (aka passengers) after the first session, and that seemed to help somewhat. But still, it's acting just as if there's an open diff back there. So either I got it wrong and installed an open (again!), there's something wrong with my Torsen (I can't think of how that would happen) or for some reason the suspension setup is unweighting that inside wheel. Given the amount of droop travel available, I doubt it's the latter. The car feels exactly like it did with the open diff back at the Open House testing, although I blamed a short-travel suspension for the behavior then. So step one is to confirm it's a Torsen for sure for sure. I'm also going to cornerweight the car and see if it's way off, but still. A turbo Miata running almost exactly the same tires (225/45-15 instead of 205/50-15) and an extra 130 hp was not having the same problem.
So how did I do? Well, I had the fastest Miata there at 1:04.989, running clockwise. That's 1.5 seconds faster than we've seen a Miata go around the track in that direction, I think. Running counterclockwise, I ran a 1:05.228. I even beat that turbo Miata on race tires. The only cars that went faster were the turbo Westfield and that STi from last weekend. No shame there! In the case of the turbo Miata, it was a matter of suspension versus horsepower again. That car's fitted with a JIC Magic suspension and is very competent on the track. It's just not quite as competent. That car was also being piloted by a very good driver who knows the track well, so it's fair to say that most of the difference was in the car.
entry 445 - tags: suspension, testing, brakes | | |  | April 9, 2008 - Video time!
I've just added three videos of the car running through the chicane at the recent track day. Honestly, the videos downplay the size of the hit the car is taking, but you can still get an idea of how well the suspension is coping. I don't know if I have an in-car shot yet or not.
For those who are wondering, the chase car is a turbo Westfield.
First pass
Second pass
Third pass - the car is completely unruffled in this one.
I forgot to mention in my last update that I set the lap record for Miatas last weekend. Not bad!
entry 446 - tags: suspension, testing | | |  | April 9, 2008 - Another video is up.
This one's a full lap of the track from behind the wheel. You can read more on the video page for this video.
Watch it!
entry 447 - tags: testing | | |  | April 14, 2008 - Naturally, the first thing I did after coming back from the track was tear the car apart.
It's what I do. The main goal was to pull out the diff and ensure it's a Torsen. Yup. But while digging around, I discovered that the upper control arm was hard to move. The bolts seem to be too tight, as backing them off slightly lets the arm fall down easily. I'll retorque them according to the factory specs and see what that does. I'm also going to cornerweight the car to see what that does for me.
entry 448 - tags: suspension | | | April 14, 2008 - Here's a little more thinking on the traction problem.
I was sharing the track with two other Miatas of similar speeds. One was running the RA1 in a larger 225 size, the other was running the Falken Azenis RT615 - not quite as sticky as the RA1. Both are making considerably more horsepower than my car. And neither was having the same traction problems. Here are some of the theories that have come up.
- My differential was the later 2003+ style, which doesn't work as well as the earlier Torsen Type 2s. Well, so was the diff in the 2004 Mazdaspeed that was sharing the track with me. I'm not 100% sure which kind of diff I have although I do know it's an LSD.
- It was a cornerweighting problem. There's some validity to that, as I haven't cornerweighted the car well for a while and the passenger's side was certainly more of a problem than the driver's. But I'm pretty sure that one of the cars out there hasn't been cornerweighted either...seeing as I'd probably be the one that had to do it.
- The inside wheel is lifting up due to the extra roll afforded by the suspension. I'm having trouble with this one, mostly because I can't imagine I'm lifting a wheel with the amount of droop available. One of the other cars was fitted with the FM upper shock mounts which allow a similar amount of upwards travel, but not as much droop.
- I didn't have the right damping and I was getting wheel hop. Okay, now I think we might be getting closer. At the autocross the week before, I'd been playing with rear damping to control hop off the line. But I think I backed it off a couple of clicks afterward. So this might be worth investigating.
- I have a bushing problem. A late arrival to the though process after the discovery over the weekend. Going back through my memory banks, I can think of one other car that had this sort of behavior - and it also had polyurethane bushings. Hmm. Neither of the other two cars on the track did. So this is definitely worth pursuing. I'll try ensuring they work smoothly first, then bung in a set of stock control arms (and bushings) later if that doesn't help. Now I just need to come up with a testing regimen that doesn't involve the track!
entry 449 - tags: suspension | | |  | April 20, 2008 - Traction pad!
Remember my attempt at a traction pad for my heels from last summer? It was a failure. That particular piece of non-skid was from Home Depot, intended for use on stairs, ladders and the like. I stopped in at a local skateboard shop a couple of weeks ago and picked up a chunk of deck tape to try again. And it works beautifully. It was on the car for the recent track day and it's still solidly mounted to the car - unlike the Home Depot stuff which came adrift almost immediately. At 20 cents per inch, it was also a whole lot cheaper than the Home Depot option. So a win overall then.
entry 450 - tags: ergonomics | | | April 20, 2008 - I put the car back together and took it out for a test drive this morning.
The upper rear control arm bolts are a bit looser to allow for free movement of that arm.
I used a piece of road I haven't used with this car before, but it's perfect for per-Targa testing. Incessantly twisty with a lot of blind corners, covered in gravel in inconvenient places and with completely hammered and badly patched pavement.
The car did quite well. I wasn't at full throttle very often but I never had a lack of traction. Even at inadvisable speeds through the roughest, twistiest sections the car never got upset although it did make some interesting movements. I'll have to go back through there with a more normal car to get a baseline. I'm also going to take Janel for a ride to make sure she's comfortable with it!
entry 451 - tags: testing, suspension | | |
|
THE DIARY