January 15, 2015 - The new track rubber is mounted and ready to try out. Those are 245/40-15 Maxxis RC-1 tires wrapped around a 15x10 Jongbloed wheel. It's a lot of rubber, and it's going to be a real challenge to get it to fit. I'm a bit worried about the fenders. entry 1132
January 21, 2015 - Test fit of the new Maxxis RC-1 tires! And it's a problem. In the front, I could probably get them to just barely clear with a hard pull of the fenders. Probably. entry 1133 - tags: wheels
January 21, 2015 - The tire fitment on the rear is a bigger problem. I don't think I can pull that fender enough to clear the tire. Almost all of the extra width of the big 245/40-15 ends up on the outside. So it's time to look at some real body modifications. entry 1134 - tags: tires, maxxis
July 1, 2015 - Track day! I was back at High Plains Raceway with the Z Car Club. Usually, this event attracts some pretty fast cars. But attendance was down and the top echelon didn't show up. There was one notable exception - a 60's 911 that had a bunch of modifications, including a MAST-built 7.0 l LS7 V8 stuck in the tail. We had some fun. I was quicker than he was on sweepers and I think I had the edge on him on high speed acceleration, but he had me under braking and on acceleration out of corners. It's hard to beat having all your weight on the rear wheels sometimes.
Otherwise, it was an exercise in passing and passing and passing. No worries, it's kind of fun to be Godzilla once in a while, and I had enough of a challenge dealing with my driving. The car was a rock star and didn't miss a beat all day.
The biggest problem was heat. It was a hot day - somewhere around 100F - and I was generating a lot of heat. Enough that I measured the temperature of the transmission tunnel at 196F and the heel of my shoe at 147. Yes, that was uncomfortable. After about 6 hard laps, I'd see the temp gauge start to move a bit on the dash, but that's still a very happy range for LS motors like mine. Even with 20 minutes on, 20 minutes off the track the car never flagged.
The brakes were much improved from a year ago. That's when I was boiling fluid and having to be very conservative. I've upgraded my brake ducting from 2" diameter to 3" and gone to 660F fluid. The brakes were still pretty hot and I wore out a set of front pads, but they never went away. I wasn't as aggressive as I could have been under braking at times - never my strongest point - but it wasn't due to a lack of braking power.
I love this engine. My maximum speed with the old one at this track was 197 kmh. Last time I was here, I had a headwind and peaked at 215 or 217. This time, I saw 222 kmh. That's a full 25 kmh faster than I ever managed with the old engine.
I had the prototype FOX suspension on the car. The Targa Miata was used as one of the development platforms, and this was the chance to get it out on the really fast stuff. After two sessions, I had it pretty dialed in and the car just felt fast and balanced. It's got great stability and fast turn-in, making the old rally-bred AFCO stuff feel surprisingly soft and wooly. I like it.
Video! Here's a clean lap, followed by the one lap I spent behind the 911. I had him on the straight, but decided to hang back and watch. Then he overheated.
This video is just a compilation of passes. NSX, Noble (or the new equivalent), new Corvette, WRX and a bunch of minnows.
THE DIARY
