March 11, 2012 - Here's the intake in place.
The filter is just above the mouth opening in the nose, visible if you get down to squirrel level. It will have no shortage of cold air there! I'm missing one piece of bodywork in the nose here, the one that seals around the front of the rad. I'll cut it to clear the intake next.
This should provide a comfortable power gain under hard use. The GM engine computer pulls timing starting at 80F intake temperature. And I was well, well above that. All of my ductwork on the driver's side won't be needed anymore, so it's possible I'll pull the NACA duct headlight cover off again and reinstall the turn indicator in place of my mesh unit. There's no advantage to ramming air in behind the radiator.
tags: intake, aero |
THE DIARY